Jobs Lviv, C / C++ / Embedded

Job Summary

Our embedded software engineering team's mission is to craft reliable, high-performance solutions that reach millions of homes worldwide within the home security market. We follow agile development methodologies with regular sprint cycles, code reviews, and continuous integration practices. The team's established approach emphasizes comprehensive testing, rigorous security standards, and close collaboration with hardware engineering, product management, and customer support teams. We pride ourselves on writing clean, maintainable code and fostering a culture of knowledge sharing and technical excellence.

We're seeking a skilled C & C++ Embedded Engineer to take ownership of critical software components in our camera-based security devices. This role involves maintaining existing products through comprehensive debugging and bug fixing, as well as developing innovative new features.

Responsibilities and Duties

— Design, develop, and maintain high-quality embedded software in C and C++ for camera-based security devices.

— Debug and resolve complex software, hardware, and network connectivity issues across the entire software stack.

— Develop new features and improve existing codebases for the product line.

— Optimize software performance for resource-constrained embedded environments.

— Conduct code reviews and provide technical mentorship to team members.

— Participate in architecture discussions and technical decision-making processes.

— Collaborate with QA teams to develop comprehensive testing strategies.

— Document software designs, APIs, libraries, and troubleshooting procedures.

Qualifications and Skills

— Proven experience in embedded development, with expertise in C and C++ (C++17 standard) and deep knowledge of RTOS and microcontroller architectures (ARM, RISC-V).

— Proficiency in the full SDLC, including professional engineering practices like Git, CMake, code reviews, and continuous integration.

— Solid understanding of network programming and experience with multithreading on multicore microcontrollers.

— Expertise in communication interfaces (I2C, SPI, UART, and Wi-Fi) and experience writing device drivers and libraries.

— Hands-on experience with hardware troubleshooting and debugging tools (oscilloscopes, logic analyzers, etc.) and cross-compilation tool chains.

— Ability to work independently and take ownership of complex projects.

— Excellent communication skills for technical discussions and documentation, with a collaborative mindset for cross-functional team environments.

— At least an Intermediate level in both written and spoken English (B1).

Nice to have

— Understanding of security protocols and encryption methods

— Experience with Python for scripting and automation

— Experience using AI-powered tools to enhance productivity and code quality

We offer multiple benefits that include

— The environment of equal opportunities, transparent and value-based corporate culture, and an individual approach to each team member.

— Competitive compensation and perks. Annual performance review.

— Opportunity to receive a Performance Bonus for your individual achievements and a Loyalty Bonus recognizing your dedication to the company.

— Gig-contract.

— 21 paid vacation days per year, paid public holidays according to Ukrainian legislation.

— Development opportunities like corporate courses, knowledge hubs, and free English classes as well as educational leaves.

— Medical insurance is provided from day one. Sick leaves and medical leaves are available.

— Remote working mode is available within Ukraine only.

— Free meals, fruits, and snacks when working in the office.

#WeAreIn for jobs that impact everyone's life. 

Do you want to lead the way in tackling complex challenges in ASIC to FPGA conversion? We are seeking a motivated and experienced Senior FPGA Design Engineer to play a key role in converting full-chip microcontroller ASIC to FPGA. In this role, you will define FPGA design constraints, develop and debug RTL conversion scripts, and support the FPGA tools to ensure smooth ASIC RTL integration. Join our team in Lviv and help us solve intricate debugging issues while working closely with global prototyping and design teams. 

Are you in?

Key responsibilities in your new role
 

• Define and implement custom IP modules for FPGA tools
• Write and verify test benches for FPGA integration and participate in debugging sessions to ensure smooth ASIC to FPGA conversion
• Develop RTL conversion scripts to automate the ASIC RTL adaptation for FPGA
• Debug hardware/firmware co-execution challenges and analyze issues with a focus on system functionality
• Assist the firmware team by reviewing and debugging C-language test firmware used for FPGA verification
• Define coding rules to facilitate efficient and FPGA-friendly RTL adaptation
• Collaborate with the global FPGA prototyping team to improve and streamline the ASIC to FPGA prototyping flow

Qualifications and skills to help you succeed
 

• University degree in Computer Science, Electronics, or equivalent
• 5+ years of experience in Digital Design using FPGA
• Experience in large-scale FPGA development in Verilog or VHDL on Xilinx devices or other FPGA platforms
• Hands-on experience with lab FPGA debug methodologies (e.g., ChipScope, Mentor Certus, oscilloscopes, protocol analyzers)
• Familiarity with scripting languages (e.g., Perl, Python, TCL)
• Good level of English

Please send us your CV in English

What if your ideas could change the way the world connects, powers up, or thinks? As a Senior Validation Engineer, you'll have the opportunity to merge creativity with your technical expertise by shaping the future of technology, driving groundbreaking projects, and bringing new ideas to life. Are you in?

In your new role you will:
 

• Drive state-of-the-art automotive technologies by leveraging embedded systems validation experience to ensure the quality and reliability of software products
• Be responsible for the validation of device drivers used for communication or signal generation/measurements (e.g., SPI, UART, PWM, ADC, DMA, etc.)
• Investigate, implement, and maintain verification and validation methods and infrastructure to improve quality and efficiency
• Drive innovation in test methods, tools, test automation, and test infrastructure to advance the field
• Institutionalize software test processes that comply with Automotive standards (e.g., ISO26262, ASPICE)
• Collaborate closely with software development teams to design, execute, and automate tests, identify and document issues, and contribute to continuous improvement
• Have ownership of reviews, including test specifications and scripts, to ensure thoroughness and accuracy

You are best equipped for this position if you have:
 

• Experience in Device Driver software testing with knowledge of standard software development Life Cycle
• Knowledge of embedded system software development or Validation using C and assembly languages
• Proficiency in programming languages such as OOP, C#, .NET, and Python
• Experience in developing and maintaining test automation and continuous integration frameworks
• Hands-on experience with tools like oscilloscopes, logic analyzers, and communication protocols (I2C, UART, SPI)
• Familiarity with version control systems (Git, SVN, branching)

• Fluency in English, with a forward-thinking and adaptable approach to learning and growth

   

Please send us your CV in English.
 

As a Systems Engineer — Motor Control and Power Conversion in our Lviv team, you’ll create innovative demos and concepts for leading customers using advanced microcontrollers and power electronic components. From optimizing motor control algorithms to designing DC-DC conversion applications and collaborating on prototypes, you’ll drive innovation and performance improvements in cutting-edge technologies.

Your Role

• Develop, optimize and fine-tune motor (BLDC, PMSM) control algorithms for sensor and sensor-less configurations
• Design motor control and DC-DC conversion power electronics
• Develop, optimize and fine-tune DC-DC conversion applications like battery chargers, various switching power sources
• Work with PCB layout designers to ensure schematic, component placement and routing accuracy accordingly to the power circuit design best practices.
• Coordinate prototype preparation, engineering validation and design testing
• Contribute to innovative ideas for motor control performance improvement, system integration improvement, components and module re-use for the different features and overall cost reduction

Your Profile

• A university degree in Electrical Engineering, Electric Drive, Electric Mobility, Control Systems or equivalent
• 5+ years of experience in the field, past work in developing microcontroller/DSP based systems for motor control application is preferred
• Familiarity with modern DC-DC conversion topologies
• Hands-on experience with lab debug equipment, such as oscilloscopes and logic analyzers, protocol analyzers
• Schematic entry in CAD (Cadence Allegro, Altium, KiCad) would be plus
• Proficiency in C (need to develop/modify/debug code for microcontroller) and relevant development tools for microcontrollers /DSP (e.g. Keil, IAR, Code Composer Studio)
• Proficiency in English (B2 minimum)

Please send us your CV in English

As a System Engineer — Capacitive Touch in our Lviv team, you’ll play a key role in revolutionizing Human Machine Interface (HMI) solutions. From designing advanced prototypes to collaborating with customers and showcasing innovative demos globally, you’ll be at the forefront of creating the next generation of sensor technologies.

Your Role

• Develop the advanced system concepts, Customer demos and Prototypes for the innovative HMI products using different sense techniques, like capacitive sensing, inductive sensing, light sensors, etc
• Develop the concepts and early prototypes of new sensor applications with a strong focus on the automotive market
• Meet our leading customers, show demos and collect/analyze feedback
• Visit our customers/leading exhibitions around the globe, like Embedded World, Electronics World Expo, The Battery Show, etc
• Participate in the new product definition/feature discussion

Your Profile

• A university degree in Computer science, Electronics, or equivalent
• 5+ years of experience in embedded/instrumentation systems
• Experience with the overall system-level designs like hardware, software, firmware, system architecture algorithms
• Deep knowledge in sensor mixed signal electronics like various types of the ADC, DAC, differential signaling, low-power, low-voltage circuits, etc.
• Fluency in C and strong knowledge the embedded firmware coding best practices
• Hands-on experience with lab debug equipment, such as oscilloscopes and logic analyzers, protocol analyzers
• Fluency in English (B2+)

Please send us your CV in English

Your Role

Requirements review

• Test plans/ test lists development
• FW test projects (C) development
• Test Automation scripts (Python) Development
• Contribution to test frameworks and test setup improvements
• GIT CI/CD integration
• Automated test results analysis and debugging

Your Profile
A degree in Computer Science, Computer Engineering, Radiotechnics or equivalent

• 3+ years of experience with embedded systems
• Deep understanding of embedded systems at bare metal level, specifically ARM Cortex-M MCUs
• Strong C language experience
• Experience with GIT implementation of CI/CD
• Good English level
• Experience with Infineon PSOC Devices, scripting in Python and/or Test Automation (plus)

Please send us your CV in English

We are looking for an attentive and responsible Electronics Assembler who will work with SMD components and ensure high‑quality PCB assembly. The role involves manual soldering, microscope work, and strict adherence to technological and ESD requirements.

Responsibilities:

• Manual assembly of basic SMD components
• Component removal and replacement under mentor supervision
• Cleaning PCBs after soldering
• Visual inspection of solder quality under a microscope
• Following technological instructions and ESD requirements

• Maintaining a clean and organized workspace

   

Requirements:

• Basic manual soldering skills for SMD components
• Experience working with 0603 / 0805 components (0402 is a plus)
• Ability to solder simple packages: SOT, SOP/SOIC
• Basic experience with a soldering station, hot air gun, and microscope
• Understanding of assembly drawings, component orientation, and polarity
• Knowledge of ESD protection practices
• Accuracy, attention to detail, patience
• Ability to work according to instructions
• Willingness to learn and grow professionally

• Responsible attitude toward work quality

   

Nice to Have:

• Experience assembling 0402 (ideally 0201) components
• Ability to solder QFN / DFN, LQFP / TQFP packages
• Experience working with RF boards and high‑frequency circuits
• Understanding of RF‑component soldering specifics (minimal overheating, solder geometry control)
• Experience with BGA assembly or rework
• Background in small‑batch or prototype production
• Skills in rework/replacement of QFN / LQFP / small RF components
• Understanding of reflow soldering thermal profiles

The company offers:

• Official employment with a competitive salary and clear, transparent terms of cooperation.
• Paid vacation (24 calendar days per year) and paid sick leave.
• Deferment from military service.
• An atmosphere of trust, open communication, and leadership — initiative is welcomed, ideas are brought to life, and the team supports your progress.
• English language classes.
• Compensation for educational and training programs.
• Team buildings and corporate events in a friendly and collaborative environment.

We are looking for a Senior or strong Middle C/C++ developer for various microcontrollers and processors with and without the use of operating systems in order to participate in the creation of unique devices that will be born right before your eyes. Interesting? Then welcome to Ektos!

Who are we?

A Danish company that has been successfully operating since 2007 and is one of the leaders in the Embedded direction. And you can become one of us!

What do you have?

-Master or Bachelor degree in electronics or computer science engineering

-Experience in C/С++ programming of 5+ years;

-Experience in design and development of products based on RTOS and RTOS-less embedded systems;

-Extensive experience of developing products with support of Ethernet protocols (TCP, UDP, DHCP, DNS, ARP, NTP, SMTP, SNMP, ICMP) and CAN protocols (J1939, CANOpen);

-Extensive experience with In-circuit e mbedded interfaces: SPI, UART, CAN, I2C, I2S, SMBus, etc.

-Extensive experience with external embedded interfaces: RS 232/422/ 485 , Ethernet, USB bus, etc.

-Extensive experience with wireless interfaces: Bluetooth, BLE , WiFi, ZigBee, etc ;

-Experience with different microcontrollers: mainly ARM Cortex- Mx based ( STM32, ATMEL, TI), ESP32, Microchip, Silicon labs (EFR and EFM series) ;

-At least B2 (CEFR) or Upper-Intermediate+ level of spoken and written English.

Required secondary list of skills:

-Version control and bug-tracking systems;

-Unit testing experience;

-Documentation compilation work;

-Skills in the use of measuring instruments (oscilloscope, multimeter, etc.);

-Hardware experience (verification work, circuitry understanding and ability to read and understand electronic schemes).

About us and what we can offer:

- 24 working days of paid vacation;

- Paid sick leave;

- Complex lunches right in the office;

- Experienced colleagues willing to share knowledge;

- Regular performance and salary negotiations;

- Professional growth: variety of projects and technologies, mentoring;

- Friendly atmosphere, concern for the comfort of specialists;

- Working trips to Denmark to exchange experience with colleagues (discussed individually);

- Ability to work in different projects, one or more at the same time;

- Easy rotation between projects;

- The office has a kitchen, shower, seating area;

ONLY 1−2 interviews (Skype and/or office)

EKTOS is a dynamically developing company that works with many different clients from all over the world in such areas as healthcare, finance, transport, agriculture, navigation, travel, banking, and many others.

We develop in C / C ++ for various microcontrollers and processors with and without an operating system and create ready-made working prototypes of devices with our departments.

Working at EKTOS will allow you to apply your high level of skills to real high-tech projects. We care about creating an informal, safe, and open environment in our offices and we offer a competitive salary.

Looking to take part in exciting and diverse projects, work with state-of-the-art equipment using cutting-edge technologies, and help create unique devices that come to life right before your eyes? Then welcome to EKTOS!

Due to the rapid growth in the number of our projects, we are expanding our Electronics Development Department and are looking for a Middle RF Electronics Engineer to join our team. Our department handles a wide range of diverse tasks. If you have experience in any of the areas listed below, we’d love to hear from you — send us your CV!

Who are we?

A Danish company that has been successfully operating since 2007 and is one of the leaders in the Embedded direction. And you can become one of us!

• Core requirements:
  • Bachelor’s or Master’s degree in Electrical Engineering, Electronics, or Telecommunications Engineering
  • 3–5 years of experience in RF design and demonstrated participation in full product lifecycle — from schematic design to validation
• RF and Analog Circuit Design
  • Design and analysis of low-noise amplifiers (LNAs), mixers, oscillators, power amplifiers (PAs), filters, and matching networks
  • Proficiency in S-parameters, impedance matching, and network theory
  • Knowledge of RF layout considerations: controlled impedance lines, ground planes, isolation, and coupling minimization
• Microwave and Antenna Systems
  • Understanding of antenna theory, RF propagation, and waveguide structures
  • Experience with antenna integration, matching circuits, and feed network optimization
• Signal Integrity and EMC
  • Familiarity with parasitic effects, crosstalk, return loss, and reflection coefficient management
  • Awareness of EMC/EMI standards and compliance design techniques
• Measurement and Testing
  • Hands-on use of: Vector Network Analyzers (VNAs), Spectrum Analyzers, Signal Generators, Oscilloscopes with RF capabilities, Power meters, noise figure analyzers, and S-parameter test setups
  • Ability to perform RF characterization
• Simulation and Modeling
  • Competence in RF simulation: S-parameter analysis, transient and frequency-domain simulations
  • Knowledge of thermal and mechanical influences on RF behavior

About us and what we can offer:

• 24 working days of paid vacation;
• Paid sick leave;
• Complex lunches right in the office (only Ivano-Frankivsk);
• Free English classes twice a week;
• Experienced colleagues willing to share knowledge;
• Regular performance and salary negotiations;
• Professional growth: variety of projects and technologies, mentoring;
• Corporate health insurance;
• Friendly atmosphere, concern for the comfort of specialists;
• Working trips to Denmark to exchange experience with colleagues (discussed individually);
• Ability to work in different projects, one or more at the same time;
• Easy rotation between projects;
• The office has a kitchen, shower, seating area;

ONLY 1−2 interviews (online and/or office)

EKTOS is a dynamically developing company that works with many different clients from all over the world in such areas as healthcare, finance, transport, agriculture, navigation, travel, banking, and many others.

We develop in C / C ++ for various microcontrollers and processors with and without an operating system and create ready-made working prototypes of devices with our departments.

Working at EKTOS will allow you to see projects from both hardware and software sides and get a high level of skill. We care about creating an informal, safe, and open environment in our offices and we offer a competitive salary.

Develop in C / C ++ for various microcontrollers and processors with and without the use of operating systems, participate in the creation of unique devices that will be born right before your eyes? Then welcome to Ektos! We are looking for developers in our office located in Ivano-Frankivsk.

Who are we?

A Danish company that has been successfully operating since 2007 and is one of the leaders in the Embedded direction. And you can become one of us!

What do you have?

- Good practical knowledge of C, C++, OOP;

- Understanding and practical application of RTOS and RTOS-less embedded;

- Experience in embedded SW development at least 3 years;

- Intermediate or higher level of English.

You would be a strong candidate if you knew something about this:

- Version control systems;

- Bug-tracking systems;

- Embedded interfaces (SPI, UART, CAN, I2C, RS485).

About us and what we can offer:

- 24 working days of paid vacation;

- Paid sick leave;

- Complex lunches right in the office;

- Experienced colleagues willing to share knowledge;

- Regular performance and salary negotiations;

- Professional growth: variety of projects and technologies, mentoring;

- Friendly atmosphere, concern for the comfort of specialists;

- Medical insurance;

- Ability to work in different projects, one or more at the same time;

- Easy rotation between projects;

- The office has a kitchen, shower, seating area.

ONLY 1−2 interviews (online and/or office)

EKTOS is a dynamically developing company that works with many different clients from all over the world in such areas as healthcare, finance, transport, agriculture, navigation, travel, banking, and many others.

We develop in C / C ++ for various microcontrollers and processors with and without an operating system and create ready-made working prototypes of devices with our departments.

Working at EKTOS will allow you to see projects from both hardware and software sides and get a high level of skill. We care about creating an informal, safe, and open environment in our offices and we offer a competitive salary.

Develop in C / C ++ for various microcontrollers and processors with and without the use of operating systems, participate in the creation of unique devices that will be born right before your eyes? Then welcome to Ektos! We are looking for developers in our office located in Ivano-Frankivsk.

Who are we?

A Danish company that has been successfully operating since 2007 and is one of the leaders in the Embedded direction. And you can become one of us!

What do you have?

- Good theoretical knowledge of C, C++, OOP;

- Understanding of RTOS and RTOS-less embedded;

- Intermediate or higher level of English.

You would be a strong candidate if you knew something about this:

- If you have commercial experience in projects or pet projects;

- Version control systems;

- Bug-tracking systems;

- Embedded interfaces (SPI, UART, CAN, I2C, RS485).

About us and what we can offer:

- 24 working days of paid vacation;

- Paid sick leave;

- Complex lunches right in the office;

- Experienced colleagues willing to share knowledge;

- Regular performance and salary negotiations;

- Professional growth: variety of projects and technologies, mentoring;

- Friendly atmosphere, concern for the comfort of specialists;

- Medical insurance;

- Ability to work in different projects, one or more at the same time;

- Easy rotation between projects;

- The office has a kitchen, shower, seating area.

ONLY 1−2 interviews (online and/or office)

EKTOS is a dynamically developing company that works with many different clients from all over the world in such areas as healthcare, finance, transport, agriculture, navigation, travel, banking, and many others.

We develop in C / C ++ for various microcontrollers and processors with and without an operating system and create ready-made working prototypes of devices with our departments.

Working at EKTOS will allow you to see projects from both hardware and software sides and get a high level of skill. We care about creating an informal, safe, and open environment in our offices and we offer a competitive salary.

Do you want to take part in interesting and diverse projects, work with the latest equipment, using advanced technologies, participate in the creation of unique devices that will be born right before your eyes? Then welcome to Ektos! We are looking for developers in our office located in Ivano-Frankivsk.

Who are we?

A Danish company that has been successfully operating since 2007 and is one of the leaders in the Embedded direction. And you can become one of us!

Key Responsibilities

• Define hardware architectures and detailed system specifications for analogue, digital, and mixed-signal circuits.
• Produce high-quality documentation that clearly describes and justifies hardware design choices in accordance with EKTOS quality procedures
• Perform electrical and thermal design calculations, simulations, and analyses.
• Design and validate power electronics, including AC/DC and DC/DC converters, battery charging systems, and battery-powered electronics.
• Conduct battery life estimation and energy consumption optimization for portable and low-power designs.
• Design and integrate RF circuits and antenna systems, including matching networks and 3rd-party antenna integration.
• Perform multilayer PCB layout, including HDI, flex, and flex-rigid board designs.
• Design high-speed PCB interfaces with a strong understanding of signal integrity validation.
• Apply EMC design principles, perform pre-compliance testing, and conduct EMC troubleshooting.
• Perform hardware bring-up, verification, and validation.
• Support the transition from prototype to mass production, including technical interaction with manufacturing.

Technical Competencies

• Advanced proficiency in analogue, digital, and mixed-signal electronics design, supported by strong analytical and simulation capabilities.
• Skilled in performing circuit- and temperature-level simulations and using industry-standard tools such as LTspice, PSpice, and Micro-Cap.
• A solid foundation in power electronics is essential, including experience with AC/DC and DC/DC converters, battery management systems, and battery-powered product design.
• Practical knowledge in RF design, encompassing antenna matching and  layout optimization for RF SoC and module-based systems (Wi-Fi, BLE, LoRa, GSM, LTE, NB-IoT, etc.).
• Proficiency in multilayer PCB design, including HDI, flex, and flex-rigid boards, is required, along with experience in creating production-ready PCB documentation.
• A comprehensive understanding of high-speed design principles—covering USB, Ethernet, DDR2/3, and HDMI interfaces—and of signal integrity and power integrity validation methods is expected.
• An in-depth understanding of EMC fundamentals, filtering, and shielding strategies, combined with hands-on experience in EMC pre-compliance testing and debugging, is essential.
• Proficient in the practical use of standard laboratory equipment such as oscilloscopes, logic analyzers, multimeters, signal generators, and spectrum analyzers.
• Strong prototype debugging, troubleshooting and repair skills.

General & Leadership Skills

• Experience in mentoring junior engineers.
• Ability to manage technical handovers, address customer issues, and support field troubleshooting.
• Skilled in task decomposition, time estimation, and proactive project communication.
• Upper-Intermediate or higher English proficiency (written and spoken).
• Proactive, self-correcting, and committed to continuous technical improvement through collaboration and hands-on experience.

Qualifications

• M.Sc. or B.Sc. in Electronics Engineering, Electrical Engineering, or related discipline.
• 7+ years of proven experience in hardware development.
• Expertise in full hardware development cycles from concept to production release.
• Familiarity with CE, FCC, EMC, and electrical safety certification standards.

About us and what we can offer:

• 24 working days of paid vacation;
• Paid sick leave;
• Complex lunches right in the office;
• Free English classes twice a week;
• Children's room with a teacher for children of company employees;
• Experienced colleagues willing to share knowledge;
• Regular performance and salary negotiations;
• Professional growth: variety of projects and technologies, mentoring;
• Corporate health insurance;
• Friendly atmosphere, concern for the comfort of specialists;
• Working trips to Denmark to exchange experience with colleagues (discussed individually);
• Ability to work in different projects, one or more at the same time;
• Easy rotation between projects;
• The office has a kitchen, shower, seating area;

ONLY 1−2 interviews (online and/or office)

EKTOS is a dynamically developing company that works with many different clients from all over the world in such areas as healthcare, finance, transport, agriculture, navigation, travel, banking, and many others.

We develop in C / C ++ for various microcontrollers and processors with and without an operating system and create ready-made working prototypes of devices with our departments.

Working at EKTOS will allow you to see projects from both hardware and software sides and get a high level of skill. We care about creating an informal, safe, and open environment in our offices and we offer a competitive salary.

Ми український стартап у сфері defence tech, який об'єднує інноваційні технології та інженерні рішення для створення продуктів, які забезпечують безпеку та захист. Зараз ми шукаємо Embedded developer для посилення команди.

Робота з офісу у Львові

Вимоги:

• впевнене володіння C/C++, Embedded C; базові знання Python, Bash для скриптів;
• досвід роботи з STM32, Raspberry Pi або аналогами;
• впевнене розуміння і досвід роботи з UART, I2C, SPI, CAN, USB, GPIO, Ethernet;
• досвід роботи з RTOS;
• інструменти з якими потрібно працювати:
  • Git, code review
  • JTAG, SWD, логічні аналізатори, осцилографи
  • вміння читати електронні схеми
  • базові навички паяння

Буде перевагою:

• досвід з протоколами зв’язку TCP/IP, MAVLink, DroneCAN;
• досвід роботи з Embedded Linux, знання Linux kernel, boot, драйверів, модулів;
• ґрунтовна база з математики, теорії систем керування та цифрової обробки сигналів (DSP);
• розуміння RF-систем, зокрема радіопередавачів і приймачів, методів модуляції та основ антен;
• досвід або знання концепцій SDR;
• досвід повного циклу розробки (планування – інтеграція);
• оптимізація пам’яті, енергоспоживання, керування режимами сну/пробудження.

Обов’язки

• розробка прошивок для мікроконтролерів згідно з технічним завданням;
• розробка та розширення функціональності існуючих драйверів на Linux;
• тестування, налагодження та інтеграція ПЗ з апаратною частиною;
• оптимізація коду під обмежені ресурси (пам’ять, CPU, живлення);
• програмування периферії та створення драйверів для зовнішніх компонентів;
• розробка модульних, функціональних, продуктивних, стресових тестів;
• документування коду, створення технічної документації;
• взаємодія з командою інженерів-конструкторів;
• розробка ПЗ для специфічних пристроїв (тестові стенди, GPS, гімбали камер, BLDC-мотори, сенсори, енкодери);
• налаштування та запуск прототипів, робота з сенсорами, джерелами живлення.

Ми пропонуємо:

• офіційне працевлаштування та можливість бронювання;
• графік роботи з 9:00 до 18:00 або з 10:00 до 19:00 - обирай зручний для себе варіант;
• можливість професійного зростання, навчання та розвитку в команді, яка готова підтримати;
• дружню, неформальну атмосферу та відкритість до нових ідей - ми цінуємо ініціативність і даємо простір для реалізації власних технічних рішень.

Ми уважно переглянемо ваше резюме та звʼяжемося з вами протягом 5-10 робочих днів, якщо ваш досвід відповідатиме поточним потребам команди.

Ми український стартап у сфері defence tech, який об'єднує інноваційні технології та інженерні рішення для створення продуктів, які забезпечують безпеку та захист. Зараз ми шукаємо Hardware Engineer для посилення команди.

Робота з офісу у Львові

Вимоги:

• досвід роботи з аналоговою та цифровою схемотехнікою: розробка схем, підбір компонентної бази, монтаж і налагодження електронних вузлів;
• навички розведення друкованих плат (зокрема багатошарових), володіння KiCad чи аналогами;
• знання сучасної елементної бази;
• вміння працювати з вимірювальним обладнанням (осцилографи, мультиметри, логічні аналізатори) та паяльними інструментами;
• розуміння та досвід роботи з цифровими інтерфейсами:  I2C, SPI, UART, CAN, RS232/RS485, PWM, USB, Ethernet;
• досвід використання систем контролю версій (наприклад, Git);
• англійська мова на рівні читання та розуміння технічної документації.

Буде перевагою:

• розуміння розробки embedded-рішень (STM32, Raspberry Pi); знання C/C++ для embedded-систем;
• знання та практичний досвід з безпровідними технологіями: Wi-Fi, Sub-1GHz.

Обов`язки:

• розробка та супровід схемотехніки, вибір компонентної бази до трасування друкованих плат;
• аналіз вимог і розробка загальної електричної схеми складних виробів;
• макетування, пайка та прототипування експериментальних зразків і вузлів;
• створення технічної документації: схеми, специфікації, інструкції, тести;
• розробка тестових стендів для перевірки компонентів, плат і зібраних пристроїв.

Ми пропонуємо:

• офіційне працевлаштування та можливість бронювання;
• графік роботи з 9:00 до 18:00 або з 10:00 до 19:00 - обирай зручний для себе варіант;
• можливість професійного зростання, навчання та розвитку в команді, яка готова підтримати;
• дружню, неформальну атмосферу та відкритість до нових ідей - ми цінуємо ініціативність і даємо простір для реалізації власних технічних рішень.

Ми уважно переглянемо ваше резюме та звʼяжемося з вами протягом 5-10 робочих днів, якщо ваш досвід відповідатиме поточним потребам команди.