Jobs

Do you want to take part in interesting and diverse projects, work with the latest equipment, using advanced technologies, participate in the creation of unique devices that will be born right before your eyes? Then welcome to Ektos! We are looking for developers in our office located in Ivano-Frankivsk.

Who are we?

A Danish company that has been successfully operating since 2007 and is one of the leaders in the Embedded direction. And you can become one of us!

What do you have?

Master or Bachelor degree in electronics engineering

5+ years of experience in HW architecture, design and development;

Analogue, digital and mixed signals electronics, designs calculations and simulations, temperature calculations and simulations (LTspice, Pspice, Micro-Cap);

Ability to describe, justify and document HW solutions and circuits;

Experience in power electronics (AC/DC, DC/DC, etc);

Experience in battery development of battery powered electronics, battery life simulations;

Understanding of RF circuits, antennas design, experience in integration of 3rd party antennas, matching circuits;

RF circuits design based on modules and SoCs (WiFi, BLE, ZigBee, MiWi, LoRa, SigFox, GSM, ¾G, NB-IoT, etc.);

Experience in layout of four and more layers PCBs, knowledge about HDI PCBs design, knowledge about flex and flex-rigid PCBs design, experience in creating PCBs production documentation (Altium Designer, OrCAD, KiCAD);

Experience in high speed PCBs design (USB, ETH, DDR2/3, HDMI) and signal integrity, knowledge about signal integrity validation principles;

Understanding of EMC basics, practice in EMC testing and troubleshooting;

Proficiency in use of standard laboratory equipment (multimeter, oscilloscope, signal generator, spectrum analyzer, etc.);

Practical experience in electronics bring-up, testing and verification, soldering and repairing skills;

Experience in production support and management;

Required secondary list of skills:

Version control and bug-tracking systems;

Software experience (ability to use Terminal software (PuTTY), flash firmware, use primitive software/firmware installation and configuration).

Required general skills:

Experience in solving of technical challenges during products handover to customers;

Ability to make tasks decomposition, estimates, follow own estimates and proactively communicate changes in the estimates;

At least B2 (CEFR) or Upper-Intermediate+ level of spoken and written English;

Proactive communication skills;

Ability to handle self-made errors and improve the knowledge by gaining the experience either from the rest of the team or the own trial & error.

About us and what we can offer:

24 working days of paid vacation;

Paid sick leave;

Assistance with relocation to Ivano-Frankivsk and a guarantee of security for the families of employees (paid by us);

Opportunity for employees to move with their families to the EU at the expense of the company;

Complex lunches right in the office;

Experienced colleagues willing to share knowledge;

Regular performance and salary negotiations;

Professional growth: variety of projects and technologies, mentoring;

Corporate health insurance;

Friendly atmosphere, concern for the comfort of specialists;

Working trips to Denmark to exchange experience with colleagues (discussed individually);

Ability to work in different projects, one or more at the same time;

Easy rotation between projects;

The office has a kitchen, shower, seating area;

ONLY 1−2 interviews (online and/or office)

EKTOS is a dynamically developing company that works with many different clients from all over the world in such areas as healthcare, finance, transport, agriculture, navigation, travel, banking, and many others.

We develop in C / C ++ for various microcontrollers and processors with and without an operating system and create ready-made working prototypes of devices with our departments.

Working at EKTOS will allow you to see projects from both hardware and software sides and get a high level of skill. We care about creating an informal, safe, and open environment in our offices and we offer a competitive salary.

Requirements:

3+ years embedded firmware development experience with C / C++, Linux / Unix platform;

Experience with ARM processors, embedded Linux;

Experience working with H.265;

Experience with Git, including merging and rebasing;

Basic understanding of electronic circuits;

Experience in embedded Linux systems (cross-build, flash, boot, system initialization, rootfs packaging, fault-tolerance, IPC, work with embedded filesystems), embedded distributions (Yocto,buildroot,OpenWRT);

Good written and verbal English communication skills;

Candidate needs to be in Kyiv (or consider relocation). Hybrid type of work.

Will be a plus:

Knowledge of Linux kernel;

Experience with any SoC, preferrably multimedia-targeted;

Video processing, streaming, encoding/decoding;

Experience working with OpenCV;

Image processing, tuning, enhancement;

OOP/OOD, strong programming experience with C/C++;

BS degree in Computer Science, or related engineering degree.

Tools:

ANSI C, Git, Linux kernel, embedded development tools (toolchain, OpenWRT, SW/HW debuggers, scripting).

What do we offer:

International work environment and work with global development teams;

Excellent work conditions in an A-Class office (Horizon Park Business Center);

Compensation package matching global standards;

Flexible work hours (as required);

Paid parking, courses, training, conferences and business trips;

Medical insurance;

Free lunches.

https://www.youtube.com/c/UbiquitiInc

Requirements:

3-5 years embedded firmware development experience with C / C++, Linux / Unix platform;

Experience with ARM/MIPS processors, embedded Linux;

Wireless protocols (802.11);

Strongly need networking skill, OSI model understanding;

Ability to adapt and quickly pick up new technologies;

Ability to work productively and autonomously, whether on a small

team or solo, including the ability to give and receive constructive criticism to team members;

Experience with all phases of the software development life-cycle;

Excellent analytical and problem-solving skills;

Experience with Git, including merging and rebasing;

Experience with bash shell scripting and/or Python;

BS degree in Computer Science, or related engineering degree;

Effective written and verbal communication skills (ENGLISH MANDATORY).

Will be a plus:

Experience working with Cross Compilers;

Experience with OpenWRT;

Basic understanding of electronic circuits.

What do we offer:

International work environment and work with global development teams;

Excellent work conditions in an A-Class office (Horizon Park Business Center);

Compensation package matching global standards;

Flexible work hours (as required);

Paid parking, courses, training, conferences and business trips;

Medical insurance;

Free lunches.

https://www.youtube.com/c/UbiquitiInc

Requirements:

Minimum of 3 years of software development experience

Detailed knowledge of Linux operating system internals

Strong C/C++ language, Bash and debugging skills on embedded systems

Strong networking knowledge

Experience in gateway features development — VPN, firewall, IPv6, QoS, security, Routing, etc.

Bachelor or MS in Computer Science or Electrical Engineering

Will be a plus:

Knowledge of Buildroot / LFS

Knowledge of NOS technology such as ONL / SnapRoute / Cumulus Network / OpenSwitch

Experience with Quagga / FRR

Understanding of dataplane processing and performance enhancement

Knowledge of Broadcom, Arista, Barefoot switch framework

Experience of data center switch development

Experience with BSP and Linux device driver development

Experience with software management process

Good team player who can work both independently and also as a team with ability to take initiative

Ability to organize and prioritize work across several projects simultaneously

Able to think broad and discuss on software architectural level

Aggressive working attitude with great communication skill and curiosity

What do we offer:

International work environment and work with global development teams

Excellent work conditions in an A-Class office (Horizon Park Business Center)

Compensation package matching global standards

Flexible work hours (as required)

Paid parking, courses, training, conferences and business trips

Medical insurance

Free lunches

Responsibilities:

Deliver new upcoming Unifi switch product

Work with hardware team from BSP level up to networking software application level

Communicate with foreign customer closely to implement desired new features and bugfixing

https://www.youtube.com/c/UbiquitiInc

This is a fantastic opportunity to join a fast-growing company at the heart of the digital revolution. Our software product is revolutionising manufacturing through automation. We are trusted by global brands and work across sectors (mobility, consumer goods, machinery etc).

We have a talented and ambitious team. We value integrity and are passionate about our mission to revolutionise advanced manufacturing.

This is your opportunity to:

• Be part of a fast-growing software product company in advanced manufacturing.
• Learn and fulfil your potential in an open, knowledge-driven culture.
• Share in our ambitious vision and make a meaningful difference towards autonomous manufacturing.

Responsibilities: 

• Create and maintain high-quality technical documents.
• Collaborate with other developers and designers to create user-friendly interfaces.
• Troubleshoot and debug software applications.
• Test 3D modelling software to ensure quality and accuracy.

You will be joining a well-versed team if you have:

• Bachelor’s Degree or Master’s Degree in Computer Science, Engineering, Software Engineering or a relevant field.
• 3+ years of experience in C++ software development.
• Strong SDLC understanding.
• Experience with open-source technologies and cloud services.
• Nice to have: experience in 3D Modelling and CAD software.
• Strong communication skills and ability to explain protocol and processes with team and management.
• Excellent problem-solving and communication skills.
• Ability to work independently and in a team environment.
• Current with industry trends, IT ops and industry best practices, and able to identify the ones we should implement.
• Time and project management skills, with the capability to prioritise and multitask as needed.

Необхідні навички

Key Responsibilities:

• 1+years experience with DSP

• DSP algorithm optimization for a low-level programming language (С, intrinsics, assembler)

• Porting float-point to fixed-point implementation

• Testing and verification of DSP solution in a simulator or emulator (on the board)

Required Skills:

• Strong C language skills

• Pre-intermediate level of the English language (documentation, emailing and verbal communication)

Required Knowledge:

• DSP theory: Filters, FFT, division, sqrt, re-sampler, etc.

• Approximation: log, exp, sin, cos, etc.

• Linear Algebra

Буде плюсом

Will Be a Plus:

• Practical knowledge of DSP platforms

• С++, intrinsics, assembler languages

• Eclipse

• Batch files

• MS Visual Studio

• MS VS code

• MATLAB: DSP System Toolbox, Linear Algebra

• Python

• GitHub

• Shell

• Audio files format

• Linux (Ubuntu)

Пропонуємо

We offer:

• Competitive compensation

• Full accounting assistance and support

• Regular annual vacation is 20 working days off

• 100% paid sick leave upon provision of the relevant document(s)

• Holidays are provided according to the residence country Law

• Improvement of the English language knowledge with our teacher

• Smart and useful presents for our employees and their kids

• Great atmosphere, creative corporate parties, and true individual approach.

Обов’язки

Key Responsibilities:

• DSP algorithm optimization for low-level programming language (С, intrinsics, assembler)

• Porting float-point to fixed-point implementation

• Testing and verification of DSP solution in a simulator or emulator (on the board)

Про проєкт

We are looking for a software engineer to work with different audio DSP algorithms, port them to fixed-point implementation, design test benches for project verification, communicate with customers and discuss solutions, design functions for a DSP library for float and fixed-point implementation.

Develop in C / C ++ for various microcontrollers and processors with and without the use of operating systems, participate in the creation of unique devices that will be born right before your eyes? Then welcome to Ektos! We are looking for developers in our office located in Ivano-Frankivsk.

Who are we?

A Danish company that has been successfully operating since 2007 and is one of the leaders in the Embedded direction. And you can become one of us!

What do you have?

- Good theoretical knowledge of C, C++, OOP;

- Understanding of RTOS and RTOS-less embedded;

- Intermediate or higher level of English.

You would be a strong candidate if you knew something about this:

- If you have commercial experience in projects or pet projects;

- Version control systems;

- Bug-tracking systems;

- Embedded interfaces (SPI, UART, CAN, I2C, RS485).

About us and what we can offer:

- 24 working days of paid vacation;

- Paid sick leave;

- Complex lunches right in the office;

- Experienced colleagues willing to share knowledge;

- Regular performance and salary negotiations;

- Professional growth: variety of projects and technologies, mentoring;

- Friendly atmosphere, concern for the comfort of specialists;

- Medical insurance;

- Ability to work in different projects, one or more at the same time;

- Easy rotation between projects;

- The office has a kitchen, shower, seating area.

ONLY 1−2 interviews (online and/or office)

EKTOS is a dynamically developing company that works with many different clients from all over the world in such areas as healthcare, finance, transport, agriculture, navigation, travel, banking, and many others.

We develop in C / C ++ for various microcontrollers and processors with and without an operating system and create ready-made working prototypes of devices with our departments.

Working at EKTOS will allow you to see projects from both hardware and software sides and get a high level of skill. We care about creating an informal, safe, and open environment in our offices and we offer a competitive salary.

Embrox Solutions — IT company that develops a wide range of unique software products. While developing our team combines modern advanced programming techniques with scientific approaches. That is why our solutions are stable in their work, rapid in their performance and flexible in their usage.

We do not only qualitatively realize the full cycle of software development, but also provide further support for established products, consulting, and business analytics.

ABOUT PROJECT

We have a few projects at the moment, so we are looking for a long-term cooperation.

Among our current projects:

- Electric vehicle charging station development

- Healthcare: Medical device development

- Smart locker

Requirements:

- C/С++ Programming Language on embedded systems

- Experience with STM32/SiLabs/Rigado/Microchip microcontrollers

Interfaces and protocols (UART, I2C, SPI, ModBus, CAN, USB, Ethernet,

etc.)

- Embedded Real-time operating systems

- Linux

- Experience in image, video, and signal processing

- Version control systems, task tracking systems

Would be a plus:

- Experience in networking: TCP, UDP, MQTT, TLS

- Understanding of cloud connectivity/IoT concepts and applications

- Automated and regression testing

Responsibilities:

- Participate in the full embedded software life cycle: design,

implementation, code reviews, documentation, testing and validation

- Analysis and systematic problem solving for SW reported issues

- Cooperate with electrical engineers

What we offer:

- 18 business days of paid vacations and paid sick leaves

- New cozy and modern office with coffee/tea/cookies

- Modern projects with cutting-edge technologies

- Technical IT English courses, Soft Skills Coaching

- Other benefits like Medical Insurance/Gym etc.

- Flexible schedule with remote opportunities

- Corporate events and team buildings

- Friendly and funny atmosphere.

Embrox Solutions — IT company that develops a wide range of unique software products. While developing our team combines modern advanced programming techniques with scientific approaches. That is why our solutions are stable in their work, rapid in their performance and flexible in their usage.

We do not only qualitatively realize the full cycle of software development, but also provide further support for established products, consulting, and business analytics.

ABOUT PROJECT

We have a few projects at the moment, so we are looking for a long-term cooperation.

Among our current projects:

- Electric vehicle charging station development

- Healthcare: Medical device development

- Smart locker

Requirements:

- C/С++ Programming Language on embedded systems

- Experience with STM32/SiLabs/Rigado/Microchip microcontrollers

Interfaces and protocols (UART, I2C, SPI, ModBus, CAN, USB, Ethernet,

etc.)

- Embedded Real-time operating systems

- Linux

- Experience in image, video, and signal processing

- Version control systems, task tracking systems

Would be a plus:

- Experience in networking: TCP, UDP, MQTT, TLS

- Understanding of cloud connectivity/IoT concepts and applications

- Automated and regression testing

Responsibilities:

- Participate in the full embedded software life cycle: design,

implementation, code reviews, documentation, testing and validation

- Analysis and systematic problem solving for SW reported issues

- Cooperate with electrical engineers

What we offer:

- 18 business days of paid vacations and paid sick leaves

- New cozy and modern office with coffee/tea/cookies

- Modern projects with cutting-edge technologies

- Technical IT English courses, Soft Skills Coaching

- Other benefits like Medical Insurance/Gym etc.

- Flexible schedule with remote opportunities

- Corporate events and team buildings

- Friendly and funny atmosphere.

We are looking for ATE Test Engineer to an international semiconductor company with headquarters in the United States. The growing team of silicon, hardware, software, and materials engineers is creating products with integrated magnetics that are far more cost and size-effective than any existing solutions.

Essential Duties and Responsibilities

• ATE test program development for Chroma SoC Test System

• Implement and verify ATE test programs for characterization, qualification, and production on Chroma SoC Test System

• Define and implement HW for Load/DUT boards

• Design, debug, optimize, diagnose, and modify analog and digital electronics circuits for test equipment

• Production support

Must possess/demonstrate the following:

• Strong knowledge of C/C++

• Analog and digital electronic engineering fundamentals

• Effectively wield the electronics tools: oscilloscopes, multimeters, signal generator, power supplies

• Able to manage time efficiently and complete tasks on schedule

• Good written and verbal communication skills

Recommended/Desired Skills:

• Experience with scripting to automate engineering tasks and data analysis (Python)

• ATE test program development experience

Work conditions:
- office work
- full time
- health insurance after successful completion of the probationary period
- compensation for English learning
- paid holidays, sick days, day off
- official employment

Are you a quality-oriented individual deeply focused on getting solutions? Do you enjoy working in an international environment and on global projects? If you are looking for a new challenge, we have the right opportunity at Infineon in Lviv, Ukraine! Apply now to become our next Test Automation Engineer for Embedded Systems.

In this role, you are part of a test automation team for embedded FW (highly reliable secure firmware located in SROM for boot and configuration of MCU) integrated into Automotive microcontrollers. You will participate in test development and automated execution (including cybersecurity testing) according to the requirement specifications, and contribute to test methodologies and test infrastructure development.

In your new role you will:
 

• Development of test specifications;
• Development of test projects for device under test (C) and test scripts (Python, tcl, PowerShell);
• Execution of test cases using an automation environment;
• Enhancement of testing tools and methods;
• Setup and maintenance of test automation infrastructure;
• Contribution to the quality of requirement specifications;
• Driving continuous improvement of quality and cost reduction.

Please send us your CV in English.
Note: This is a temporary 2 years contract with the possibility of staying afterwards.


You are a passionate embedded test automation engineer with a quality-oriented mindset. You strive for the highest levels of automation, testing cost and time efficiency. You’re able to effectively work as an individual contributor as well as a proactive team player.

You are best equipped for this job if you have:
 

• A University degree in Computer science, Microelectronics or a similar field of study;
• At least 3 years of experience in embedded software engineering or testing;
• Expertise in Embedded SW automated testing;
• Programming languages knowledge: Embedded C, Python, scripting languages;
• Basic knowledge of MCU architecture/operation;
• Experience with CI/CD infrastructure setup and maintenance is a plus;
• Experience in cybersecurity testing in embedded systems would be a plus;
• Knowledge of Auto SPICE and functional safety for embedded systems would be a plus;
• Fluency in English.

We are seeking an RF Systems Engineer to work on multi-channel antenna systems integration and optimization. The ideal candidate will have hands-on experience with antenna arrays and RF front-end design.

Key Responsibilities:

• Design and integrate multi-channel RF systems
• Configure and test antenna array setups
• Perform RF measurements and system calibration
• Design RF signal distribution networks
• Optimize system performance
• Document technical specifications and test results
• Troubleshoot RF issues

Required Qualifications:

• Bachelor's degree in Electrical Engineering or related field
• Experience with antenna arrays
• Proficiency in RF test equipment
• Knowledge of RF system calibration
• Understanding of RF front-end design

Technical Skills:

• RF measurement techniques
• Network/Spectrum analyzer operation
• RF signal chain design
• PCB layout understanding
• RF simulation tools
• System integration experience

We are looking for a highly skilled Software Engineer with expertise in C++ or C# and a proven ability to design and implement software features from concept to deployment. The ideal candidate will possess a deep understanding of software architecture and system operations on a high level (cloud integration), enabling them to oversee projects with a comprehensive view. This role demands a balance of technical depth, creativity, and a forward-thinking approach to solving complex software challenges.

Responsibilities and Duties

• The vacancy involves working with high-level architecture more than with embedded
• Design, develop, and maintain software applications and systems.
• Take ownership of feature development from conceptualization to deployment, ensuring alignment with business goals.
• Conduct system analysis, including performance, security, and integration considerations.
• Implement robust testing and validation processes to ensure the quality and reliability of software solutions.
• Mentor junior developers, fostering a culture of technical excellence.
• Provide technical leadership in critical problem-solving and strategic decision-making processes.

You should bring with you:

• Experience with python / Go
• At least 4 years’ of programming experience in C++ or C#
• Proven ability to develop features from start to finish, from design to implementation
• Team playing attitude, with excellent communication skills
• Agile experience — advantage.

We are a forward-thinking manufacturing company specializing in cutting-edge developments and producing high-tech solutions in radio electronics and mechanical engineering. We are looking for a creative and skilled Electronics Engineer to join our ambitious team and contribute to next-generation technologies.

You’ll be part of a team that turns innovative ideas into real products — from research and prototyping to final manufacturing. If you’re passionate about radio electronics, embedded systems, and future tech, this is the place to make an impact.

Responsibilities:

- Design, develop, and enhance advanced electronic devices

- Create and maintain technical documentation for your designs

- Test and debug hardware to ensure optimal performance

- Collaborate on R&D initiatives and cutting-edge projects

Requirements:

- Degree in Electronics, Radio Electronics, or related field

- 2+ years of hands-on experience in electronics engineering

- Strong knowledge of modern radio electronics technologies

- Experience working with LoRa protocol

- Proficiency in C and Python

- Familiarity with NVP, MVP, image processing, and DSP

- Confident working with schematics and electronic components

- Experience with tools for circuit simulation and analysis

Nice to Have:
- Passion for research, experimentation, and innovation

- Ability to work independently and in a collaborative team

- Attention to detail and a proactive approach to solving technical challenges

If you're ready to shape the future of electronics with us — send us your CV and let’s build something incredible together.

Job Description:

• Undergraduate or Bachelor's/Master's degree in Computer Engineering;
• Basic experience in C++ development;
• Must have basic knowledge of software development tools and software development life cycle;
• Data analysis and debugging skills;
• Good analytical and problem-solving skills;
• English: Upper Intermediate;
• Good communication skills.

Job Responsibilities:

• Undergo on-job training;
• The engineer will be responsible for the development of the Windows desktop application.

Project Description:

Customer is one of the leading providers of protocol analyzers, exercisers, jammers, and verification tools for existing and emerging digital communication standards. HQ in Chestnut Ridge, NY, the company has sales and development in the US, Europe, and Asia.

GL is working on desktop software that, combined with the client’s principal product, will generate, capture, analyze the traffic of low-level hardware high-speed data transfer protocols, targeted at storage companies that depend on analysis test tools in their development and test processes