Jobs miltech

About the role

Edge Tech Trade is building a dedicated Doodle Labs presence in Ukraine to support the rapid adoption of Doodle Labs Smart Radios across Ukrainian unmanned systems — UAVs, FPV platforms, UGVs, USVs, and tethered/ISR systems. As a Field Application & Sales Engineer, you will be the primary technical face of Doodle Labs in country: integrating radios into customer platforms, running field tests with operators, training units and OEM partners, troubleshooting RF and networking issues in the most demanding electronic-warfare environment in the world, and turning that ground-truth feedback into wins for the customer and product input for Doodle Labs HQ.

This is closer to a US-style Field Sales Engineer / Field Application Engineer than a traditional integration engineer: roughly half hands-on lab and field integration, half customer-facing technical sales support. You should be comfortable bench-testing a radio in the morning, flying integration tests with an OEM in the afternoon, and walking a brigade through link budgets and frequency planning the next day.

Key responsibilities

Customer integration & field engineering

• Integrate Doodle Labs Smart Radios (Helix, RM, Embedded, Mini-OEM families) into customer platforms — drones, ground robots, payloads, ground control stations, and repeater/relay nodes.
• Run on-site installations, configuration, and commissioning at OEM partners (e.g., drone manufacturers) and at military units across Ukraine.
• Conduct field tests and range trials: link budget validation, throughput / latency measurements, mesh behavior, video streaming performance, and EW-resilience testing in real operational conditions.
• Diagnose RF issues, jamming/interference patterns, and antenna problems on the ground; recommend fixes (antenna selection, placement, frequency plan, power settings, mesh topology).
• Build and maintain reference integrations and demo kits (radio + autopilot + companion computer + GCS) that the team can use for sales demos, customer training, and rapid prototyping.

Technical sales & customer success

• Act as the primary technical contact for Ukrainian customers — pre-sales scoping, architecture proposals, BOMs, and post-sales support.
• Translate customer requirements (range, payload, video bitrate, EW threat, regulatory band) into a Doodle Labs configuration: radio model, frequency band, antenna, power amplifier (e.g., 4W PA), and network topology.
• Train OEMs and end-users on radio configuration, the Doodle Labs Smart Radio Web UI / CLI, mesh setup, frequency planning, and basic RF troubleshooting.
• Represent Doodle Labs and Edge Tech Trade at Ukrainian defense-tech events (e.g., Brave1, Iron Demo Day) — booth demos, technical talks, customer meetings.
• Maintain a tight feedback loop with Doodle Labs HQ in the US: file structured bug reports, feature requests, and field reports; escalate critical issues; share competitive intelligence from the Ukrainian market.
   

Programs & ecosystem

• Support Ukrainian military codification of Doodle Labs radios — provide technical documentation, lab measurements, and on-site testing data; coordinate with the Edge Tech Trade resource managing the paperwork and government liaison.
• Investigate existing Smeela / NATO Stock Number subcodes via OEM partners (PG Robotics, Lucky Strike, Heavy Shot, etc.) to accelerate codification.
• Manage and grow the small Doodle Labs-owned demo and R&D inventory in country (low hundreds of units): allocations, traceability, RMA flow, and rapid fulfillment for priority customers.
• Coordinate with Doodle Labs HQ on sample shipments (radios, antennas, PAs), test plans, and joint engineering investigations.

Must-have qualifications

• Hands-on integration experience with wireless / RF systems: COFDM, LTE/5G, mesh radios, or similar IP-over-RF links. Direct experience with Doodle Labs, Silvus, Microhard, Persistent Systems, or comparable mesh radios is a strong plus.
• Solid RF fundamentals: link budgets, antennas (gain, polarization, MIMO), propagation, TX power vs. sensitivity, frequency planning, and basic spectrum analysis.
• Strong networking knowledge: IPv4/IPv6, routing, VLANs, multicast, latency/jitter for video, and how all of this behaves over a mesh.
• Experience integrating radios with unmanned platforms — autopilots (ArduPilot / PX4), MAVLink, RTSP/UDP video pipelines, gimbals, and companion computers (Raspberry Pi, NVIDIA Jetson, x86 SBCs).
• Comfortable with Linux (Debian/Ubuntu) at the command line: serial/UART, SSH, networking config, firmware flashing, log analysis.
• Hands-on hardware skills: cabling, connectors (SMA/RP-SMA, MMCX, U.FL), basic soldering, multimeter / oscilloscope / spectrum analyzer / VNA usage at a working level.
• Strong troubleshooting instincts in the field — able to isolate whether a problem is RF, networking, autopilot, power, mechanical, or operator error, often under time pressure.
• Excellent technical communication in English (spoken and written) — you will be the bridge between Ukrainian customers and a US-based engineering team.
• Willingness and eligibility to travel frequently across Ukraine to military units, including to areas closer to the front (within reasonable safety constraints).

Nice to have

• Direct prior experience with Doodle Labs Smart Radios (Helix, RM-1700, RM-2450, Mini-OEM, Embedded) and the MN-MIMO mesh stack.
• Experience with Ukrainian defense-tech ecosystem: Brave1, Smeela / military codification process, Army+ procurement, "e-points" (formerly e-balls) unit purchasing system.
• Experience with EW-resistant designs: frequency hopping, narrow-band fallback, alternative bands (sub-GHz, 1.8 GHz, S-band, C-band), and field hardening against jamming.
• Experience with FPV and BVLOS operations, tethered drones, swarming, or counter-UAS systems.
• Familiarity with power amplifier integration (e.g., 4W PA modules), filters, and TX/RX chain design.
• DevOps / scripting skills (Python, Bash) for test automation, log parsing, and field telemetry tooling.
• Prior service or work with Ukrainian Armed Forces, GUR, SBU, or Special Operations Forces units.
• Public speaking / demo experience.
   

What we offer

• A senior, high-impact role at the intersection of cutting-edge wireless technology and the most operationally relevant defense-tech market in the world.
• Direct working relationship with Doodle Labs HQ in the US — your field reports shape product roadmap.
• Access to the latest Doodle Labs hardware and a fully-funded local lab and demo inventory.
• Backing of the Edge Tech Trade / Edge Solutions team — engineering support, BD coverage, and operational infrastructure.
• Competitive compensation aligned with senior Ukrainian defense-tech market rates; structure and band to be confirmed at offer stage.
• Travel covered. Equipment provided. Real ownership of customer outcomes.

Hiring process

• Initial screen with Edge Tech Trade 
• Technical interview with Doodle Labs— RF, networking, integration, and a field-scenario walkthrough.
• Reference checks and offer.

ARX Robotics Ukraine is looking for an experienced test engineer to join a team shaping the future of autonomous systems for both defense and civilian applications. Our rapidly expanding company, specializing in autonomous unmanned systems and sensors, is looking for a passionate and skilled Senior Hardware Engineer to drive innovation in our growing Kyiv team. In this role, you will lead the development and integration of cutting-edge electrical systems for our autonomous robots.

Key Responsibilities:

• Development: define of requirements, improvement, and integration of electrical and mechanical systems for autonomous ground platforms.
• Component selection: evaluate, select, and qualify components and suppliers to meet system requirements.
• Team collaboration: work closely with mechanical, software and customer success teams to ensure fast and efficient implementation of solutions that meet user requirements.
• Documentation: create and maintain technical documentation related to ongoing processes and projects.
• Users technical support: provide technical support, troubleshooting for robotic systems both in field conditions and remotely.
• User training: take part in user training and ongoing education on UGV operation.
• Support and promotion of initiatives as for improvement of technical solutions, as well as technical participation in testing and validation of new solutions.

Qualifications:

• Technical education in mechatronics, electronics, mechanics, or related fields. Background in robotics will be a plus.
• Analytical and troubleshooting skills proven by working experience.
• Strong experience in technical support and coordination of large-scale projects, as well as managing multiple technical projects simultaneously.
• Knowledge of integration and configuration of industrial protocols and network interfaces (including CAN, Ethernet, serial, TCP/IP, Wi-Fi, and others).
• Experience in both electrical and mechanical design will be a plus (EPLAN, Autocad Inventor).
• Willingness to travel for business trips across Ukraine.
• Both driver’s license and driving experience on a mechanical gearbox are mandatory.
• English communication skills — fluent.

We Offer

• Impactful Work: A high-impact role shaping next-generation technologies used by leading world armies and first responders.
• Professional Growth: Opportunities for development and training, including potential programs in Germany.
• Direct Feedback: Close collaboration with end-users and the chance to see the immediate impact of your work in the field.
• Agile Environment: A fast-paced work culture with minimal bureaucracy and flexible working hours.
• Medical insurance

About the Job

ARX Robotics Ukraine is looking for an experienced test engineer to join a team shaping the future of autonomous systems for both defense and civilian applications. Our rapidly expanding company, specializing in autonomous unmanned systems and sensors, is looking for a passionate and skilled Senior Test Engineer to drive innovation in our growing Kyiv team.

Key Responsibilities:

• Develop and implement field testing methodologies, validation procedures, and acceptance criteria for autonomous robotic systems and their mechanical and control subsystems.
• Plan, organize, and conduct internal, field and operational tests for unmanned ground platforms.
• Analyze, document, and systematize testing results, preparing detailed technical reports and recommendations as for both mechanical and control subsystems.
• Participate in the development, evaluation, and implementation of new technical solutions aimed at improving overall system performance and reliability.
• Collaborate closely with the overall company`s teams to ensure efficient validation and integration of new features and improvements.
• Organize and conduct complex technical training, including repair and maintenance procedures and exercises for operators and technical personnel.
• Support troubleshooting and root-cause analysis of technical issues identified during testing and operation.

Qualifications:

• Technical education in mechatronics, electronics, mechanics, or related fields as well as background in robotics will be a plus.
• Strong experience in developing testing methodologies and validation processes for complex both mechanical and control systems is a mast.
• Knowledge of electrical engineering principles and experience in troubleshooting and diagnosing electrical circuit faults is a must.
• Experience in technical documentation creating, structured analysis, and reporting of test results.
• Proven experience in organizing and conducting of technical trainings for direct users.
• Strong leadership and organizational skills with experience of teams managing and coordinating personnel in multitask environments.
• Strong analytical thinking and problem-solving skills.
• Willingness to travel for business trips across Ukraine.
• Both driver’s license and driving experience on a mechanical gearbox are mandatory.
• English communication skills — fluent.

We Offer

• Impactful Work: A high-impact role shaping next-generation technologies used by leading world armies and first responders.
• Professional Growth: Opportunities for development and training, including potential programs in Germany.
• Direct Feedback: Close collaboration with end-users and the chance to see the immediate impact of your work in the field.
• Agile Environment: A fast-paced work culture with minimal bureaucracy and flexible working hours.
• Medical insurance

We are looking for a Lead Hardware & Systems Engineer to own the full hardware domain — from system architecture through to serial production and stable field operation. You will drive our prototype to a production-ready device, coordinate mechanical and electronics engineers, and set up small-series manufacturing with potential to scale.

Responsibilities

• Architecture & Design — system hardware architecture, component and enclosure selection, thermal management, sealing, rugged design decisions, and technical specifications
• Hands-on Development — hardware bring-up, testing, verification, reliability analysis, and fault investigation
• Industrial Readiness — prototype-to-DFM/DFA transition, production documentation, contractor management, and quality control

• System Integration — integration of hardware with electronics, sensors, and antenna systems; cable architecture; field power; uptime and health monitoring

   

Requirements

• Proven experience in hardware system development
• Track record of taking a product from prototype to serial production
• Strong system architecture skills and hands-on hardware development
• Familiarity with industrial-grade or mil-tech standards
• Understanding of mechanical design and CAD tools

Nice to Have

• Experience with rugged solutions for field or industrial environments
• Background in DefenseTech, aerospace, or adjacent domains
• Familiarity with RF components or antenna systems
• English — B1+ (technical documentation, occasional communication)

What We Offer

• Real impact — your decisions directly affect the reliability of air defence systems in the field
• Full ownership of the hardware domain from day one
• Deep-tech engineering challenges that don’t exist in the civilian sector
• Office in central Kyiv, 3 minutes from the metro
• Full-time, standard business hours; some tasks may require involvement outside the usual schedule (field testing, critical updates)

We are looking for a Computer Vision Engineer with solid ML/DL experience to join our team on challenging projects.
We consider engineers at Middle and Senior levels - tasks and responsibilities will be adjusted accordingly. 

Required Qualifications:

• 3+ years of experience in computer vision
• High proficiency in Python
• Strong experience with deep learning and the PyTorch framework for computer vision tasks
• Research experience in computer vision with a focus on delivering results
• Ability to work independently or within a small team, with a strong sense of ownership over results

Nice to Have:

• Experience with deep learning solutions for detection, tracking, image retrieval, and segmentation tasks
• Understanding of geometric computer vision principles
• Model optimization: quantization, pruning, neural network compilers
• Hands-on experience implementing low-level CV algorithms
• Experience with sensor fusion (IMU, magnetometer, GNSS, camera)
• Knowledge of C++

Sales Engineering role – Full Time – Hybrid (Kyiv/Warsaw)

Why we exist:

Swarmer develops software that makes drones autonomous and allows them to operate together, in large, coordinated teams — no pilots needed. Our technology has been battle-tested in Ukraine— the world’s most intense proving ground for drone warfare.

In March 2026, we became the first Ukrainian defense startup to go public on NASDAQ, following a $15M Series A — the largest investment in a Ukrainian defense tech company since the start of the war.

Working at Swarmer means operating at the intersection of engineering rigor and frontline reality. The problems and environments are complex, and the stakes are very real. We built this software to enable democratic nations to defend themselves.

If you are motivated by building resilient systems that matter and by seeing the direct impact of your work, you’ll find purpose here.

What we’re looking for:

We are looking for a Field Applications Engineer with a strong embedded systems background who can operate comfortably across customer-facing technical sales, technical communications, and hands-on engineering support.

This role is ideal for someone who can bridge engineering depth with clear customer communication and help articulate complex technical concepts to both technical and non-technical audiences.

What you’ll do:

• Support pre-sales technical engagements with customers and partners
• Answer technical customer questions during evaluations, procurement, and integration discussions
• Translate customer requirements into clear technical recommendations and solutions
• Develop technical materials and written responses for proposals, grant applications, customer documentation, and partner communications
• Work closely with engineering and product teams to accurately communicate product capabilities and limitations
• Assist with hardware setup, integration, and field support when needed
• Represent the company in customer meetings, industry events, and technical discussions

What we need:

• BS/MS in Electrical Engineering, Computer Engineering, Computer Science, or related field
• 3+ years of experience in a technical pre-sales, solutions engineering, or FAE role
• Strong embedded systems background, including firmware/hardware integration
• Comfortable working with PCB hardware, embedded devices, and drone systems
• Excellent verbal and written communication skills
• Ability to explain complex technical topics clearly and concisely
• Confident, extroverted, and comfortable interacting directly with customers and partners
• Strong technical writing skills, including the ability to contribute to proposals, grant applications, and customer-facing technical documentation
• Practical, hands-on mindset; effective in both lab and field environments

Would be an advantage:

• Experience with drones, robotics, RF systems, or edge AI platforms
• Familiarity with Linux-based embedded systems
• Experience supporting enterprise, defense, or government customers
• Exposure to wireless communications, telemetry, or autonomous systems
• Experience contributing to technical proposals, SBIRs, grants, or RFP responses

Working Model & Travel:

For this role, close collaboration with engineering, product, and integration teams is essential.

• Location: Kyiv or Warsaw
• Work model: Hybrid role (mandatory requirement)

Travel is a significant part of the role. Candidates should expect up to ~50% travel

What you’ll get:

• Your work ships fast and gets used. Direct operational feedback from frontline users in weeks, not years
• A fast-paced environment with minimal bureaucracy and no “process for the sake of process”
• Competitive salary and a comprehensive benefits package (insurance, paid sick leave, 20 paid days off per year, military reservation, corporate lunches in the office)
• Flexible hybrid work

How’s the hiring process going:

 Recruiter Screen →  Interview with the Team →  Technical Interview →  Final Interview →  Skip-level Interview (optional) →  Security Check →  Offer

Interested? Let’s connect and discuss the details!

We are looking for a Test Engineer responsible for developing and executing product testing procedures, analyzing results, and ensuring compliance with technical requirements within a MilTech production environment.

The ideal candidate is a technically skilled engineer with experience testing complex mechanical or electronic systems.

Key Requirements

• Experience working with technical and engineering documentation
• Ability to prepare technical instructions, operating procedures, and equipment documentation
• Strong knowledge of analog and digital electronics, power electronics, and signal integrity
• Hands-on experience with laboratory and production test/measurement equipment
• Experience developing test software using tools such as Python, C#, or LabVIEW
• Familiarity with hardware interfaces and automation platforms used in manufacturing
• Strong troubleshooting skills, with the ability to diagnose complex hardware/software issues using structured methods such as Failure Analysis (FA), Design of Experiments (DOE), and statistical analysis
• Experience in high-volume manufacturing environments
• Understanding of yield improvement, Cp/Cpk, DFM/DFT, and quality standards such as ISO and IPC
• Knowledge of Lean manufacturing principles; Kaizen experience is an advantage
• Experience supporting equipment modernization projects and new product introduction (NPI) is a plus

Responsibilities

• Develop, maintain, and optimize test equipment and the overall test strategy across different test stages, including ICT, FCT, and EOL
• Ensure test processes are aligned with product requirements and manufacturing needs
• Lead the development, implementation, and lifecycle management of automated test equipment (ATE), fixtures, software, and measurement systems
• Analyze test data, investigate failures, and implement corrective actions to improve yield, reduce false failures, and minimize production downtime
• Provide technical guidance and support to test engineers and technicians
• Participate in design reviews and help establish best practices, standards, and technical documentation
• Collaborate closely with R&D, manufacturing, quality, and supply chain teams to ensure testability, efficient product launch, and compliance with quality standards

Nice to Have

• Experience with Lean / Kaizen initiatives
• Involvement in production ramp-up or manufacturing transfer projects
• Experience launching new products into mass production

We are a startup developing alternative navigation systems for UAVs, and we are looking for a Middle QA Engineer to take ownership of the testing process and speed up release cycles and pre-flight product preparation.

Tech skills:

• 2+ years as a QA Engineer
• Strong Linux terminal usage
• Python, Bash scripting
• Git, Docker (usage level)
• Test automation experience
• Experience in writing technical documentation
• Upper-intermediate English or higher
•  

Nice to have:

• Experience with UAVs or any other hardware
• MAVLink, ArduPilot
• CI/CD experience

• Driver’s license and experience driving a van (Category B)

   

What you will do:

• Prepare the product for flight tests (assembly, setup, checklist verification)
• Perform functional tests on drones with communication via MAVLink
• Analyze test results and create high-quality bug reports
• Independently fix minor bugs
• Write and maintain technical documentation and user manuals
• Collaborate closely with the development team and work in fast-paced agile-based iterations

• Travel to test sites for flight testing

   

What we offer:

• On-site work with access to hardware and lab facilities
• Opportunity to directly influence the product and processes
• Startup culture valuing speed, involvement, and initiative
• Work with cutting-edge technologies and real-world flight tests
• Reservation of employees from mobilisation

We are looking for a Vulnerability Management Analyst to support and improve the company’s vulnerability management program across cloud platforms, identity systems, endpoint security solutions, and business-critical environments. 
This role focuses on the full vulnerability lifecycle — from identification and risk assessment to remediation tracking and reporting — ensuring vulnerabilities are managed in a structured, risk-based, and auditable manner.

You will work closely with SOC, Security & Risk, IT, DevOps, and Engineering teams to reduce security exposure and improve the organization’s overall security posture.

Responsibilities:

• Manage the vulnerability lifecycle, including identification, analysis, prioritization, remediation tracking, and validation
• Review vulnerability scan results, identify real risks, and eliminate false positives
• Assess vulnerabilities based on exploitability, business impact, and environmental context
• Coordinate remediation activities with IT, Engineering, DevOps, and asset owners
• Track remediation progress and maintain accurate documentation and reporting
• Collaborate with SOC and Security teams on active threats, exploitation risks, and incident correlation
• Maintain dashboards, vulnerability backlogs, and operational/security reports
• Monitor threat intelligence and public advisories for emerging vulnerabilities
• Contribute to improving vulnerability management processes, tooling, and reporting standards

Required Skills & Experience:

• 3+ years of experience in Vulnerability Management, Security Operations, or Cybersecurity
• Experience working with vulnerability scanning and management tools
• Strong understanding of vulnerability assessment, remediation, and risk prioritization
• Knowledge of cloud environments, identity platforms, endpoint security, and modern infrastructure
• Understanding of CVSS, threat intelligence, and vulnerability exploitation concepts
• Experience collaborating with technical and non-technical stakeholders
• Strong analytical, organizational, and communication skills

The company offers:

• Official employment with a competitive salary and clear, transparent terms of cooperation.
• Paid vacation (24 calendar days per year) and paid sick leave.
• Support for your professional growth — the company is actively expanding, and you’ll have the opportunity to grow together with it.
• An atmosphere of trust, open communication, and leadership — initiative is welcomed, ideas are brought to life, and the team supports your progress.

We are looking for a SOC Lead to lead and scale the company’s Security Operations Center, ensuring high-quality incident response, efficient security monitoring, and continuous improvement of detection and response capabilities.

This role is critical in bridging the gap between having security tools and operating a mature, scalable, and measurable security operations function.

You will work closely with the SOC team and technical stakeholders to improve alert quality, reduce operational inefficiencies, strengthen incident response workflows, and enhance the organization’s ability to detect and respond to modern cyber threats across infrastructure, cloud environments, and critical assets.

Responsibilities:

• Lead and coordinate the SOC analyst team, including task prioritization, mentoring, and quality control
• Oversee daily SOC operations: monitoring, alert triage, investigations, escalation handling, and incident coordination
• Support and drive complex/high-severity incident investigations through containment and remediation
• Improve SIEM detections, reduce false positives, and optimize alert quality and workflows
• Develop and maintain SOC playbooks, runbooks, and operational procedures
• Drive automation and process improvements to reduce analyst workload and improve SOC efficiency
• Track SOC KPIs (MTTD, MTTR, SLA, alert quality) and provide operational reporting
• Collaborate with Security & Risk and technical teams to strengthen overall security operations

Required Skills & Experience:

• 5+ years of experience in SOC, Incident Response, or Security Operations
• Experience leading SOC teams or acting as a technical lead
• Strong hands-on experience with SIEM, EDR/XDR, and incident management processes
• Experience handling complex security incidents and improving detection quality
• Understanding of MITRE ATT&CK, threat detection, and SOC best practices
• Strong analytical, communication, and stakeholder management skills

Nice to Have:

• Experience with cloud security (AWS, Azure, GCP)
• Experience with SOAR, automation, or scripting
• Security certifications such as CISSP, GCIH, GCIA, SC-200, Splunk, or similar

The company offers:

• Official employment with a competitive salary and clear, transparent terms of cooperation.
• Paid vacation (24 calendar days per year) and paid sick leave.
• Support for your professional growth — the company is actively expanding, and you’ll have the opportunity to grow together with it.
• An atmosphere of trust, open communication, and leadership — initiative is welcomed, ideas are brought to life, and the team supports your progress.

Наш партнер — інноваційна технологічна компанія/ Наша мета полягає в тому, щоб сприяти технологічному розвитку, створюючи передові та інноваційні продукти, які відповідають потребам наших клієнтів.

Компанія пишається своєю корпоративною культурою, яка підтримує інновації та співпрацю, ми створюємо умови для того, щоб наші співробітники могли розвиватися професійно і досягати нових висот у своїй кар’єрі.

Зараз компанія в пошуку досвідченого C++/ArduPilot Backend Engineer.

Responsibilities:

• Design, develop, and maintain C++ applications and services that interact with embedded systems, specifically using Ardupilot/PX4 or other similar platforms.

• Collaborate with hardware engineers to integrate C++ based software with embedded systems and sensors, enabling seamless data exchange and device control.

• Identify, troubleshoot, and resolve software and hardware integration issues, ensuring high-quality, reliable, and performant solutions.

• Utilize Python for up to 20% of development, mainly for scripting, testing, and automation tasks.
 

Required Qualifications:

• 4+ years of experience in development with a focus on embedded systems, device programming, or hardware interfacing.

• Proven experience with Ardupilot/PX4 or similar platforms (e.g., Betaflight, iNav).

• Solid understanding of embedded systems, microcontrollers, and hardware-software interaction.

• Strong expertise in C++, with experience in performance optimization,

multithreading, and I/O operations in resource-constrained environments.

• Experience with Python for development, including scripting, testing, and automation, as well as its use in embedded systems.

• Experience with serial communication protocols (e.g., UART, SPI, I2C).

• Experience in Linux/Unix environments and tools (e.g., Git, SSH, command-line utilities).
 

Will be a plus:

• Experience with single board PCs (e.g., Raspberry Pi, Arduino, etc.).

• Knowledge of cloud technologies or IoT platforms (e.g., MQTT, AWS IoT, Google Cloud IoT).

• Soldering and engineering skills.

• Experience with 3D printing.

Please, pay attention!

This role is available ONLY to EU/USA/Canada/Turkey citizens. 

We're seeking an experienced Project Manager to drive the team for a long-term external project. The client is a big European alliance that provides high-tech solutions for the Defense Industry.
You will be a part of an impactful, secure and innovative project.

Required skills:

• Proven experience of delivering front-end / full-stack web projects.
• Strong command of Scaled Agile, Scrum,  Kanban — and the judgement to pick the right one.
• Confidence owning the full delivery lifecycle: scope, schedule, budget, quality, risk, stakeholder communication.
• Hands-on with Jira / Atlassian, Confluence, and modern PM tooling.
• Programme-level quality ownership.
• Strong written and communication English skills. 
   

Nice-to-have:

• Background in fintech, govtech, healthtech, or other domains with formal security accreditation.
• Familiarity with the FE technical context (React/TypeScript, OpenAPI, CI/CD pipelines) — does not need to code.
• Experience reporting into multiple stakeholders across vendor boundaries.

Tasks to perform:

• Run Project planning, sprint cadences, demos, and retrospectives.
• Own end-to-end delivery of the Project Frontend programme: scope, schedule, budget, quality, risks.
• Maintain programme-level quality posture: cumulative IV&V disposition rates, open critical/major findings, security vulnerability ageing, and design system coverage.
• Own stakeholder communication with the client and Tallium leadership (PMO × CEO sync).
• Manage IV&V findings: ensure critical findings block the next sprint's acceptance, major findings get committed resolution dates.
• Produce sprint and PI status reports; flag risks early.
• Team management, ensuring a high productivity level and motivation.

Project Description:

The project is a Government Tech solution that delivers a production-ready frontend UX/UI ideas for an innovative application journey. It includes a high-fidelity prototype, a scalable API-driven frontend architecture based on a shared design system, and a secure, compliant multi-platform experience.
Built as an independently deployable web application, the frontend connects to all systems through a single backend API layer.

We offer:

• An interesting, influential project;
• Long-term cooperation with a full-time involvement.
• Flexible work schedule and Remote cooperation;
• Professional development with an individual plan of growth;
• Stable salary and planned reviews;
• Paid vacation and sick leaves;
• Corporate team building & workshops, trainigs;
• Excellent team of dedicated professionals;
• Development budget for each employee.
• Strong corporate culture.

Вимоги до володіння мовами

Англійська

C1 – Просунутий

Location: Dnipro, Ukraine (on-site preferred)
Company: Strix Air
Industry: Defense Technology / Counter-UAS / Autonomous Systems

About Strix Air

Strix Air develops scalable drone defense systems for modern warfare. The company builds counter-UAS platforms, interceptor drones, autonomous systems, distributed command-and-control infrastructure, and remote operations technologies designed for contested battlefield environments. Ukraine’s defense technology ecosystem continues to expand rapidly, with growing focus on UAVs, counter-drone systems, and scalable battlefield technologies.

Role Overview

We are looking for a Chief Marketing Officer to build and lead Strix Air’s global marketing, communications, and brand strategy.

You will work directly with the founders to position the company among defense customers, military organizations, government stakeholders, international partners, investors, and media.

This role combines strategic positioning, communications, defense industry visibility, and international business support.

Responsibilities

Strategic Positioning

• Define and evolve Strix Air’s global positioning.
• Build category leadership in drone defense and counter-UAS systems.
• Develop messaging across products, technologies, and company vision.

Communications & Brand

• Lead company communications and content strategy.
• Create presentations, brochures, white papers, videos, and product materials.
• Manage website, social media, PR, and media relations.
• Support product launches and strategic announcements.

International Partnerships & Business Support

• Prepare materials for defense customers, government organizations, NATO-related stakeholders, and strategic partners.
• Support participation in international exhibitions, conferences, and defense events.
• Help build Strix Air’s visibility within the global defense ecosystem.

Public Relations

• Build relationships with defense media and industry analysts.
• Coordinate interviews, press releases, and public communications.
• Develop thought leadership around modern drone warfare and air defense.

Requirements

Must Have

• Strong experience in strategic marketing, communications, branding, or business development.
• Excellent written and spoken English.
• Ability to explain complex technologies clearly and convincingly.
• Strong presentation and storytelling skills.
• High level of ownership and execution.

Strong Plus

• Defense, aerospace, dual-use, robotics, UAV, or deep-tech experience.
• Experience with international markets and partnerships.
• Experience working with investors, governments, or enterprise customers.

What We Offer

• Opportunity to help build one of Ukraine’s leading defense technology companies.
• Direct involvement in international partnerships and global expansion.
• Work on technologies that directly impact modern warfare and national security.
• Competitive compensation.
• Fast-moving, high-autonomy environment.
• Office in Dnipro.
• Employee reservation (mobilization deferment) available for eligible candidates.

Mission

Building scalable drone defense systems for modern warfare.

We are looking for a Senior Embedded Vision Integration Engineer to build and integrate sensor pipelines for precision turret systems operating under strict real-time and hardware constraints.

You will be responsible for connecting and synchronizing cameras, rangefinders, and optical sensors into a cohesive embedded platform — ensuring reliable, low-latency data delivery to targeting and control systems. This role is ideal for someone who owns the full integration layer: from hardware bring-up and driver configuration to pipeline architecture and system-level testing. You will work directly on defense projects for Ukraine, seeing a short path from implementation to field testing.

What We Offer

• Direct contribution to defense projects for Ukraine.
• Collaboration with top experts in vision hardware, robotics, and embedded systems.
• Ownership of key architectural and integration decisions.
• Competitive compensation based on experience.
• Temporary military service exemption for work on defense-critical projects.

Requirements

Core Technical Skills — Required

• 5–8 years of commercial embedded software development.
• Degree in Computer Science, Electrical Engineering, Physics, or similar.
• Strong Linux embedded development experience (NVIDIA Jetson, ARM SoCs).
• Solid C++14/17/20; Python for tooling and scripting.
• Hands-on experience with camera integration: MIPI CSI, USB3, GigE Vision, RTSP streams.
• Low-latency video pipeline development: GStreamer, V4L2, DeepStream.
• Experience integrating rangefinders (laser, stereo-based) and reading/fusing sensor output at the system level.
• Understanding of optical systems: FOV characteristics, wide-angle vs. narrow-angle lenses, zoom control interfaces.
• Experience with hardware bring-up, device trees, kernel modules, or BSP customization.
• Solid understanding of real-time constraints, latency budgeting, and system timing.
• Ability to work independently with minimal supervision.

Will Be a Plus

• Experience with thermal/IR cameras and night-vision imaging.
• PTZ or stabilized gimbal integration.
• IMU integration and sensor fusion basics.
• ROS/ROS2 experience.
• Multi-sensor time synchronization (PPS, hardware triggers, PTP).
• MLOps or model deployment pipelines on edge devices.
• Mission-critical or safety-critical systems experience.
• Remote telemetry or monitoring tooling.

Responsibilities

• Integrate and configure EO/IR cameras, laser rangefinders, and optical sensors into the turret platform.
• Build and maintain low-latency video pipelines supporting wide-angle (search/acquisition) and narrow-angle (tracking/engagement) channels.
• Implement FOV switching logic, inter-channel synchronization, and sensor alignment.
• Interface with rangefinder hardware and expose distance data to the targeting subsystem.
• Perform camera calibration and sensor-to-sensor geometric alignment.
• Collaborate with the CV team to ensure clean, well-timed data delivery to detection and tracking modules.
• Integrate sensor outputs with turret control and stabilization systems.
• Participate in hardware selection and system architecture decisions.
• Ensure robustness and reliability of deployed sensor systems under field conditions.
• Support field testing, debugging, and system maintenance.

Для наших партнерів, технологічній компанії у сфері MilTech, шукаємо амбітного Business Development Manager, який здатний будувати довгострокові відносини з державними структурами та великими оборонними контракторами.

Основні обов’язки:

• Розробка та реалізація стратегії виходу на ринки країн НАТО та ЄС.
• Встановлення та підтримка відносин з представниками Міністерств оборони та оборонних кластерах.
• Керування повним циклом B2G/B2B продажів.
• Пошук та залучення локальних партнерів у Європі.
• Вести моніторинг та брати участь у міжнародних тендерах та грантових програмах у сфері безпеки.
• Представляти компанію на ключових івентах.
  
  Вимоги:
• Від 5 років у Business Development у сферах MilTech, GovTech, авіації або важкої промисловості.
• Знання специфіки європейського оборонного замовлення, процедур сертифікації та експортного контролю.
• Досвід роботи зі складними угодами та довгими циклами прийняття рішень.
• Вільна англійська (C1/C2). Знання додаткової мови  буде величезною перевагою.
• Вміння вести переговори на рівні С-level та вищих державних чиновників.
• Готовність до відряджень.
  
  Буде плюсом:
• Наявність активної мережі контактів у оборонних відомствах або фондах підтримки стартапів у сфері безпеки.
• Розуміння принципів роботи фондів EIF/EDF (European Defence Fund).

      Ми пропонуємо:

• Конкурентну заробітну плату 
• Можливості для професійного зростання та розвитку
• Дружній колектив та комфортні умови праці
• Можливість відвідання кращих куточків світу