14 January

Embedded Developer

Dnipro · $2000 · 5 years of experience · Pre-Intermediate

Микроконтроллеры семейства PIC (PIC16, PIC18, PIC24, dsPIC) Языки программирования: C/C++, Assembler Пакеты автоматизации проектирования: OrCAD, MicroCap, Proteus Реверс-инжиниринг электронных узлов и схем. Эксплуатация современного контрольно-измерительнного оборудования

Assembler, C/C++, MicroCap, OrCAD, PIC/dsPIC, Proteus, RTOS, Git

Разработка программного обеспечения для приборов на базе микроконтроллеров PIC24, dsPIC33 в среде MPLAB с использованием диспетчера задач (RTOS). Работа с графическими дисплеями 240х128, 128х64. Применение алгоритмов цифровой обработки сигналов и измерений (измерение среднеквадратического значения напряжения, измерение времени дребезга контактов и т.д.).

Интересный проект. Адекватный менеджмент. Профессиональный рост.


10 January

разработчик микроконтроллеров, С, C++

Remote work, Ukraine · $1500 · More than 10 years of experience · Beginner/Elementary

Работаю с микроконтроллерами STM8, STM32, AVR, AVR32, PIC, TI (MSP430), ESP8266, ESP32. в среде программной разработки IAR , CooCox на языках C, C++ , Assembler , при необходимости применяю RTOS . Пишу программы для PC в Visual Studio (C#, C++) и Rad Studio (Borland C, C++). Большой опыт работы в использовании протоколов RS485, RS422, SPI, UART, USART, I2C, LAN, CAN, TCP IP, UDP, BLE, X10, ZigBee, Lora, MODBUS. Имею опыт в разработке средств автоматики умного дома, средств опознавания образов и автоматики производства, программировании и разработке аппаратного и программного обеспечения на основе Raspberry и Orange, имею опыт в разработке робототехнических систем. Работаю с микросхемами датчиков ускорения, гироскопами, датчики температуры, давления, микросхемами GPS навигации, GSM , GPRS модемами и др. В работе применяю PCAD2006.

C++, C, STM32, Electronic, Linux, Embedded, Visual Studio

Работаю с микроконтроллерами STM8, STM32, AVR, AVR32, PIC, TI (MSP430), ESP8266, ESP32. в среде программной разработки IAR , CooCox, на языках C, C++ , Assembler , при необходимости применяю RTOS . Пишу программы для PC в Visual Studio (C#, C++) и Rad Studio (Borland C, C++). Большой опыт работы в использовании протоколов RS485, RS422, SPI, UART, USART, I2C, LAN, CAN, TCP IP, UDP, BLE, X10, ZigBee, Lora, MODBUS. Имею опыт в разработке средств автоматики умного дома, средств опознавания образов и автоматики производства, программировании и разработке аппаратного и программного обеспечения на основе Raspberry и Orange, имею опыт в разработке робототехнических систем. Работаю с микросхемами датчиков ускорения, гироскопами, датчики температуры, давления, микросхемами GPS навигации, GSM , GPRS модемами и др. В работе применяю PCAD2006. Готов делать полный цикл разработки. ( разработка схемотехники, программного обеспечения, разработка печатных плат и технической документации). Все средства для разработки, программирования и создания опытных образцов есть в наличии. По конкретному проекту готов разработать схемотехнику, ПО для микроконтроллеров и приложение для PC ( Windows), Android, а так же отладка (возможен опытный образец устройства) Тестирование, испытание полная документация для производства .( Полный цикл разработки)


29 December

embedded software developer

Dnipro · $3000 · More than 10 years of experience · Upper Intermediate

30+ years of software development experience. Full cycle of SW development, participating in HW development, first SW prototypes for new HW, testing & code review, unit-tests, legacy SW updating & bugfixing, hard-to-detect bug fixing. C/C++, assemblers, building scripts, Linux, DSP, Matlab, Eclipse and others. Ethernet, IP, UDP, TCP, SNMP, HTTP, SPI, I2C, V.34, V.42, AIS, WiFi, TDMoIP and others. STM32, LPC213x, TMS320, MPC8260, 8051, AM3359, DragonBall and others.

Linux, C/C++, Embedded, Networking, bash

Hard-to-detect bug fixing Optimization

Linux, embedded


27 December

C++/Qt Developer

Dnipro · $400 · 1 year of experience · Pre-Intermediate

I have been developing in C++ for over 1 year. I have several completed projects such as 2d games (QT framework), desktop apps (QT network, SQLite), parallelization and multi-threaded computational tasks (std::thread). In addition to C++ I also have a little experience in developing on pure C in Linux environment. My main skills are: -C++/STL/QT -OOP/Design patterns/SOLID -Basic algorithms and data structures -Multithreading

C++, STL, Multithreading, OOP, Design Patterns, C, Linux, Networking, Algorithms, Git, Visual Studio, Qt, SQL

Specialist’s degree in Computer Systems Software. Dnipro Polytechnic National Technical University.

I expect interesting projects from absolutely any field (gamedev, embedded, development for Linux/Unix, network programming, desktop development in Qt, etc.). Ready for quick learning.


20 December

Senior C++ Developer

Remote work, Ukraine · $3000 · More than 10 years of experience · Upper Intermediate

C++ on Linux (C++ 11, Boost, STL, cmake) Java experience (EE, Spring, Hibernate, DL4J) Scala Python - web (Flask) and machine learning stack (numpy, tensorflow, keras).

C (plain), C/C++, Java Core, Unix, Java EE, OOP, Python, Scala, Machine Learning

Completed several projects as independent developer. Worked in different areas including healthcare, finances (FIX communications), ML.

Rich experience in C++ on Linux, Java EE, Python. Have experience in development of data science libraries. Interested in Machine Learning and / or IoT projects.


19 December

Embedded Engineer

Kyiv, Lviv, Kharkiv, Zaporizhzhya, Vinnitsia, Dnipro, Uzhgorod · $1500 · More than 10 years of experience · Pre-Intermediate

Навыки и практический опыт(более 15 лет) проектирования, разработки и производства электроники, сопровождения продуктов на протяжении всего жизненного цикла. Направления: средства для автоматизации процессов, модернизация оборудования, централизованные и автономные системы контроля и управления, телеметрия, M2M, IoT.

C, Embedded, Algorithms

• Руководитель проектов по разработке электронных устройств. Проектирование устройства, организация рабочего процесса, непосредственное участие на всех этапах разработки. • Выполнение части проекта. Предпочтительно программирование микроконтроллеров. • Реализация проекта самостоятельно.


19 December

junior c++ developer

Dnipro · $600 · 1 year of experience · Pre-Intermediate

I write modules (DLL) for a program that works with production scales in SoftInform comp.(freelance) Passed internship in Apriorit. Participated in the development of antivirus software (ANTIPOD team)

C/C++, C, STL, Qt, Visual Studio, Git, OOP, С++11, C#/.NET, CSS3, HTML5, C ++ WinAPI, Boost, Windows Forms

I'm developing a project - Encrypted Virtual Disk. It works with the Windows operating system driver. It supports several encryption modes and has two program management modes (using the console or window application). Two network chats are written in C ++. Using boost and WinApi. An application that sends files over the network(С++, Boost.Asio) Game - OOP snake using console colors and highscores. (С++, WinApi) Program that extension of the trial license for Visual Studio.(C++, WinApi,CryptoApi)

I like to program in C ++, as this is my favorite programming language. I am a responsible and purposeful person.


18 December

Senior Android Developer, Full Stack Developer

Dnipro, Lviv · $5600 · More than 10 years of experience · Upper Intermediate

Hello, I'm an professional developer with 10+ years of experience in Software Development under various technologies. During the last 5 years I’ve been developing Android applications using top libraries and technologies. Android SDK, NDK, Java, C/C++, Python, Django, SQL.

Android, Android SDK, Java, Django, C/C++, Parse

I'm an expert software developer with over 10 years of experience.

Prefer to join a professional team rather than work as a single developer.


15 December

Developer C/C++

Dnipro, Kyiv, Lviv · $800 · 2 years of experience · Pre-Intermediate

Good day! I’m junior C/C++ developer and I seek full-time job. A little bit to about myself: - I’m able to solve the tasks set without external control; - I’m actively engaged in self-learning; - I’m good with time management. Something (about half) descriptions about my studying projects: - Libft - This first project as a 42 student is going to help you consolidate your piscine experience. You are going to re-code several functions of the standard C library, as well as other utility functions that you will use often during your training. - Fillit - Fillit is a project which involves discovering and getting acquainted with a recurrent problem in programming: the search of an optimal solution among a very large number of possibilities in a reasonable amount of time. In this project, you will arrange Tetriminos among them and determine the smallest square that can fit all of them. - Computer graphics project fract’ol - Discover 2D programming and the psychedelic universe of fractals in this project, using minilibX. - RT - Let’s shift into higher gear! Following up on Rtv1, RT pushes the limits of what Raytracing can do: mirror effect, transparency, object cutting, texture application…Use the preceding project to create an infrastructure capable of supporting all these ramifications and obtain sublime computer-generated images. And last but not least about my previous job (junior PHP developer): - I did the review code; - I fixed small bugs; - I sought bugs in legacy code; - I expanded the admin part of the site, DB, API; If you have any questions, feel free to write to me. Regards, Igor Stalevskiy.

C/C++, Multithreading, Algorithms, OOP, STL, bash, Linux, SQL, Git, C++, C, CSS, PHP, REST API, MySQL, Jira, CMake, SDL2


27 November

Embedded Software / Firmware Engineer, Team Lead , Software Architect

Remote work, Ukraine · $4500 · More than 10 years of experience · Upper Intermediate

- Embedded, С, С++, ASM, Python, SQL, HTML, CSS, PHP, PASCAL, DELPHI - Low level / bare metal programming - Linux ( User Space, Multithreading, Kernel, Modules / Drivers, CrossCompiling, Scripting, gdb, GCC ) - Windows - RTOS (FreeRTOS, mbed) - ARM ( STM32 ), RISC ( Atmel , PIC) - I2C, SPI, UART, DAC, ADC - Bluetooth, Wifi, SubGHz - ModBUS - Consumer Electronics, IoT, Robotics, Motion control, CNC, Industrial Automation, Industrial control, Additional skills: - Security (mbedTLS, Cryptolib) - AI / ML (TensorFlow, AI for Embedded) - Flask, SQLite, Wordpress - Hardware design ( Altium ) - Electronics basics - Eclipse, Clion, Keil, IAR, Cmake, Makefile, Altium, GCC, AVRStudio, ImageCraft, CodeVision - Team lead - Delivery Director - Project manager - Product manager

bare metall programming, CNC, Embedded, Embedded C, Firmware, Industrial Automation, Industrial control, low level programming, motion control, Pascal, PCAD, RISC, Robotics, C/C++, Assembler, Project Management, team lead, ARM, Product management, Bluetooth, Linux, RTOS, TCP/IP, WiFi, Wireless, C++, Git, OOP, C, Networking, Windows, Altium, Jira, VCS, Architecture, GCC, Eclipse, Keil, EWARM, bash, Embedded Linux, Continuous Integration, Microcontroller, Microcontrollers, Python, Multithreading, SQL, OOP/OOD, Linux kernel, CLion, Delphi, Machine Learning, Flask, HTML, CSS, С++, STL, REST API, CMake, Make/CMake

- 20 years of experience (from Junior Embedded Engineer to Delivery Director) - more than 30 finished projects all over the world (USA, Belgium, Germany, Israel, Azerbaijan, Russia, Moldova, Ukraine) - Skilled team leader and team player - Project management and Product management skills

+ growth possibility + perspective area of the project usage + relevant salary + visible results of activity - No fintech, No network equipment